Freetech P8F154, Руководство пользователя

Страница: 62 / 80

Mainboard User’s Manual
Integrated Peripherals 54
Use IR Pins : Use this item to set the IR pins. The options are
“IR-Rx2Tx2”(default) and “RxD2, TxD2”.
Onboard Parallel Port : This option is used to assign the I/O
address for the onboard parallel port. The options are:
378 / IRQ7 (default)
278 / IRQ5
3BC / IRQ7
Disabled (disables the onboard parallel port).
Parallel Port Mode : There are four options: “SPP” (Standard
Parallel Port), “EPP” (Enhanced Parallel Port), “ECP” (Extended
Capabilities Port) and “ECP+EPP” and “Normal”. Change the mode
from “SPP”(default) to the enhanced mode only if your peripheral
device can support it.
EPP Mode Select : Sets the EPP specification. There are two option
“EPP1.7”(default) and “EPP1.9”.
ECP Mode Use DMA : When the onboard parallel port is set to
ECP mode, the parallel port can use DMA “3” or DMA “1”.
After you have mode your selections in the BIOS Features Setup
screen, press <ESC> to go back to the main screen.