Freetech P8F154, Руководство пользователя

Страница: 43 / 80

Hardware Installation
Auto Power On 35
3. Place the shunt back to pin 1 and pin 2 of JP4.
4. Power
on the system.
Solution B
If the CPU clock setup is incorrect, you may not be able to boot up .
In this case, follow these instructions:
1. Turn the system off, then on again. The CPU will
automatically boot up using standard parameters.
2. As the system boots, enter BIOS and set up the CPU clock.
Note:
If you are unable to enter BIOS setup, turn the system on
and off a few times.
3.9. Auto Power On
After losing AC power, the system will not turn on automatically
when the power comes back unless you set the options in BIOS.
This concludes Chapter 4 covers the BIOS setup program.