- 37 -
!"
!"
!"
!"
!"
Other Connectors
ATX Power Supply Connector (JWR1)
Locate the 20-pin male header ATX power connector (JWR1) on your
mainboard. Plug the power cable from the ATX power supply unit directly
into JWR1 ATX power supply connector.
Note 1:
The ATX power connector is directional and will not go in unless the
guides match perfectly making sure that pin#1 is properly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place to
ensure a solid attachment.
Note 3:
Your ATX power supply must be supplied to ACPI +5V standby power
and at least 720mA compatible.
Note 4:
Make sure your power supply have enough power for higher speed
processor installed.
Cooling Fan Connectors for CPU FANs (FAN1), & AGP
FAN Chassis (FAN2)
The mainboard provides three onboard 12V cooling fan power connectors
t
o support CPU FANs (FAN1), and AGP Chassis device (FAN2) cooling fans.
Note:
Both cable wiring and type of plug
may vary depending on the fan
maker. Keep in mind that the red
wire should always be connected to
the +12V header, and the black
wire, to the ground (GND) header.
SENSE
GND
+12V
JWR1
1
