- 69 -
Power-On by PCI Card
This item enables/disables the power on function of PCI Card.
"
The choice: Disabled or Enabled.
Wake Up On LAN/Ring
This item determines the system will resume by activity of LAN/Ring. If
enabled this feature enabled, system will power on itself from power-off
mode when the activity of LAN/Ring
"
The choice: Disabled or Enabled.
RTC Alarm Resume
When this item enabled, your can set the date and time at which the
RTC (real-time clock) alarm awakens the system from Suspend mode.
"
The choice: Disabled or Enabled.
Data (of Month)
This item selects the alarm date.
"
Key in a DEC number:Min=0, Max=31.
Resume Time (hh:mm:ss)
This item selects the alarm Time.
"
Key in a DEC number:Min=0, Max=23.
Primary INTR
Press Enter to enable/disable the wake up ability of a specified IRQ.
"
The choice: OFF, or ON.
In the following is a list of IRQ's, Interrupt ReQuests, which can be
exempted much as the COM ports and LPT ports above can. When an
I/O device wants to gain the attention of the operating system, it signals
this by causing an IRQ to occur. When the operating system is ready to
respond to the request, it interrupts itself and performs the service.
When On mode exist, activity will neither prevent the system from
going into a power management mode nor awaken it.
* IRQ3 (COM 2 )
* IRQ4 (COM 1)
* IRQ5 (LPT 2)
* IRQ6 (Floppy Disk)
* IRQ7 (LPT 1)
* IRQ8 (RTC Alarm)
* IRQ9 (IRQ2 Redir)
