Freetech FLEXUS P6F132, Руководство пользователя

Страница: 62 / 67

Mainboard User’s Manual
56 Save & Exit Setup
To disable the password, press <Enter> instead of entering a new
password when the “Enter Password” dialog box appears. A message
appears confirming that the password has been disabled.
If you have set supervisor and user passwords, only the supervisor
password allows you to enter the BIOS Setup Program.
Note: If you forget your password, the only way to solve this
problem is to discharge the CMOS memory by turning power
off and placing a shunt on jumper JP12 to short pin 2 and pin
3 for five seconds, then putting the shunt back to pin 1 and pin
2 of JP3.
4.12.Save & Exit Setup
Selecting this option and pressing <Enter> will save the new setting
information in the CMOS memory and continue with the booting
process.
4.13.Exit Without Saving
Selecting this option and pressing <Enter> will exit the Setup Utility
without recording any new values or changing old ones.
This concludes Chapter 4. Chapter 5 describes the drivers and utility
programs that are packaged with the mainboard.