Mainboard User’s Manual
50
Power Management Setup
USB KB Wake-Up From S3:
Use this item to enable USB activity
to wakeup the system from a power saving mode. The default setting
is “Disabled.”
CPU Thermal-Throttling:
This item sets the percentage of time that
the CPU is idled if CPU throttling is initiated by excess heat. The op-
tions are:
•
50.0% (default)
•
37.5%
•
25.0%
•
12.5%
•
87.5%
•
75.0%
•
62.5%
Resume by Alarm:
When set to “Enabled,” you may set the date
(day of the month), hour, minute and second to turn on your system.
When set to set “0” (zero) for the day of the month, the alarm will
power on your system every day at the specified time.
**Reload Global Timer Events**
Global Timer (power management) events are I/O events whose oc-
currence can prevent the system from entering a power saving mode
or can awaken the system from such a mode. In effect, the system
remains alert for anything that occurs to a device that is configured as
Enabled
, even when the system is in a power down mode.
Primary/Secondary IDE 0/1:
When enabled, any activity on the pri-
mary or secondary IDE channels will wake up the system from a power
saving mode.
FDD, COM, LPT Port:
When enabled, any activity on the floppy
disk drive (FDD), serial ports (COM), or parallel ports (LPT) will
wake up the system from a power saving mode.
PCI PIRQ[A-D]#:
When enabled, any activity on the PCI card
channels will wake up the system from a power saving mode.
Press
ESC
to return to the main menu.
Содержание FLEXUS P6F132
Страница 1: ...P6F132 133 Mainboard Manual September 11 2001 ...
Страница 2: ......
Страница 36: ......