Freetech FLEXUS P6F132, Руководство пользователя

Страница: 55 / 67

BIOS Configuration
Power Management Setup 49
MODEM Use IRQ: If you want an incoming call on a modem to
automatically resume the system from a power-saving mode, use this
item to specify the interrupt request line (IRQ) that is used by the
modem. You might have to connect the fax/modem to a mainboard
Wake On Modem connector for this feature to work. Options are:
•
3 (default)
•
4
•
5
•
7
•
9
•
10
•
11
•
NA
Suspend Mode: The CPU clock will be stopped and the video signal
will be suspended if no Power Management events occur for a speci-
fied length of time. Full power function will return when a Power
Management event is detected. Options are from “1 Min” to “1
Hour” and “Disable.” The default is “Disable.”
HDD Power Down: The IDE hard drive will spin down if it is not
accessed within a specified length of time. Options are from “1 Min”
to “15 Min” and “Disable.” The default is “Disable.”
Soft-Off by PWRBTN: When set to “Instant-Off” (default), pressing
the power button will turn off the system power. When set to “Delay
4 Sec.” you have to press the power button and hold it for more than
4 seconds to turn off the system power. Otherwise, the system just
goes into suspend mode. The options are “Instant-Off” and “Delay 4
Sec.”
Wake-Up by LAN :: When set to “Enabled”, the system power will
be turned on if the LAN port receives an incoming signal. Default
setting is “Disabled.”
Power On by Ring: When set to “Enabled,” any activity on the M o-
dem port will wake up the system from a power saving mode. The
options are “Disabled” and “Enabled” (default).