background image

2. Press the   

or   

button to select the desired Melody Call tone. 

3.Press PPT(Push to talk) button to confirm the channel setting or MONI button or wait up to 10 second to confirm 
NOTE: Melody Call Tones is available up to 10 melody tones. 

TOT 

time out timer means the unit will automatically stop transmit after 30sec or 60 sec continuously transmit. 
Press  Menu button 5 times,screen will  display 60 TO,press Up or  Down button can choose 60 or 30 seconds or 
OF.Default setting is 60 seconds,press the PTT button to confirm changes. 

Roger beep on/off   

Press the MENU/PWR button 6 times,screen will display

  OF, 

character

  OF 

keep flashing, by press

  UP

 or 

Down

 

button to choose ,

ON

 or 

OF, 

press 

PTT 

button to confirm setting, this is a tone which is automatically transmitted 

whenever the PTT button is released.Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT 
and  VOX  transmission.)  Roger  Beep  can  be  heard  through  the  speaker  when  Key  Beep  is  on.  Roger  Beep  is 
transmitted even if Key Beep is turned off. 
However, Roger  Beep  will  not be  heard  from  the speaker.Press  PPT(Push to talk) button  to confirm the channel 
setting.or MONI button or wait up to 10 second to confirm.default setting is on when power on

 

Key Beep 

 

Press the MENU/PWR button 7 times,screen will display

  OF, 

character

  OF 

keep flashing, by press

  UP

 or 

Down

 

button to choose ,ON or 

OF, 

Press PPT(Push to talk) button to confirm the channel setting.or MONI button or wait up 

to 10 second to confirm,    default setting is on when power on 

 
DCM 
 

Press the MENU/PWR button 8 times,screen will display

  OF, 

character

  OF 

keep flashing, by press

  UP

 or 

Down

 

button to choose ,

ON

 or 

OF, 

press the MENU/PWR to set DCM,in this model the LCD will display DCM on the top and 

When  DCM  function  is  active,  priority  channel  is  watched  every  1.5  seconds.,default  setting  is  off    when  power 
on.Press PPT(Push to talk) button to confirm the channel setting.or MONI button or wait up to 10 second to confirm 
 

NOAA Weather radio   

Press 

button 3 seconds to active NOAA Weather radio ,RX icon will display and weather icon will flash ,press 

MENU/PWR button  once  ,the weather channel is flashing ,use 

or   

button to select the  desired weather 

channel .The weather channel,total have 10 channels for selecting ,press PTT button for confirm the setting .Press 

button 3 seconds again to

 

deactivate NOAA Weather radio. 

 

NOAA Weather ALERT

 

 
Press 

button 3 seconds to active NOAA Weather radio    ,press MENU/PWR button Twice,AL OF will appear on 

the LCD screen, use 

or   

button to select AL OFF or ON ,when the AL is on ,when have emergency singal 

come,it will alarm 20 seconds ,press any button to listen the messeage, 
 

 

SYMPTOM 

 

SOLUTION 

 

No power. 

 

The battery may be weak. Check battery. Ensure that the battery are installed properly. 
Replace the old battery with new battery AAA*4PCS   

Reception 

is 

weak. 

 

Press the   

button to increase VOLUME. The receiving signal may be weak and/or 

out of range.   

Содержание R5










Отзывы: