To reduce carbon foot print, these
Freestyle instructions are printed with
soy inks on recycled paper.
ENGLISH
ENGLISH
S1 – Start/stop button
S2 – Lap/reset button
S3 – Mode button
DISPLAY MODES:
The watch has four display modes:
NORMAL TIME, CALENDAR, ALARM
and STOPWATCH.
In NORMAL TIME mode, press and
hold S1 button to display the
CALENDAR, or press and hold S2
button to display the ALARM.
Press S3 button to toggle between
NORMAL TIME mode and STOPWATCH
mode.
TO SET THE TIME AND CALENDAR:
1. Press S3 button to select NORMAL
TIME mode.
2. Press and hold S3 button for around
3 seconds, then release and press
S3 button again. The Tuesday
indicator and the second digits will
blink.
3. Press S2 button to reset the second
digits to zero. This will increase the
time by 1 minute if the original
setting is at 30 to 59 seconds.
4. Press S1 button, the minute digits
will blink.
5. Press S2 button to set the minute
digits. Holding down the button will
speed up the process.
6. Press S1 button, the hour digits will
blink
7. Press S2 button to set the hour
digits. Holding down the button will
speed up the process.
8. Follow the same pattern to set the
month, date and day (of the week).
9. When finished making all the
settings, press S3 button to confirm.
TO SET THE HOUR FORMAT:
In NORMAL TIME mode, press and
hold S2 button, then press S3 button
to toggle between 12-hour and 24-
hour format. The “A” indicator will be
displayed to indicate the watch is in
12-hour format.
After setting to 12-hour format, the
P.M. indicator will be displayed to
indicate the time period 12:00P.M.-11-
:59P.M. in NORMAL TIME mode.
TO SET THE CALENDAR FORMAT:
In NORMAL TIME mode, press and
hold S1 button, then press S2 button to
toggle between month-date and
date-month format.
TO SET THE ALARM:
In NORMAL TIME mode,
1. Press and hold S3 button for around
3 seconds. The Monday indicator and
the hour digits will blink.
2. Press S2 button to set the hour
digits. Holding down the button will
speed up the process.
3. Press S1 button, the minute digits
will blink.
4. Press S2 button to set the minute
digits. Holding down the button will
speed up the process.
5. When finished making all the
settings, press S3 button to confirm.
NOTE: The alarm will automatically be
activated after being set.
TO TURN ON/OFF THE ALARM AND
HOURLY CHIME:
In NORMAL TIME mode,
1. Press and hold S2 button and then
press S1 button once to activate the
hourly chime. The chime indicator
will appear.
2. Press again to active the alarm. The
alarm indicator
will appear.
3. Press the third time to deactivate the
hourly chime. The chime indicator
will disappear.
4. Press the fourth time to deactivate
the alarm. The alarm indicator will
disappear.
WHEN AN ALARM OR HOURLY CHIME
GOES OFF:
A tune will be emitted by the hour when
the hourly chime function is activated.
An alarm tune will be emitted at the
designated time when the alarm is
activated. To stop the tune, press any
button.
TO USE THE STOPWATCH:
1. Press S3 button to select
STOPWATCH mode.
2. The stopwatch will then be displayed
in its current state – reset, running,
or stopped.
3. To resume a counting, press S1
button to resume from where it left
off.
4. To start a new counting, reset the
stopwatch to zero first.
Press S1 button to stop counting,
then press S2 button to reset
counter to zero.
For the measurement of elapsed time:
In STOPWATCH mode,
1. Press S1 button to start counting.
2. To stop counting, press S1 button
once. Press S1 button again to
resume from where it left off.
3. To reset to zero, press S1 button to
stop counting and then press S2
button.
For the measurement of split time:
In STOPWATCH mode,
1. Press S1 button to start counting.
2. While the stopwatch is running,
press S2 button once to register a
lap. The split time of the registered
lap will be displayed.
The stopwatch is still running in the
background. To display the currently
accumulated time, press S2 button
again.
3. Repeat the last step until all the laps
have been registered.
4. To reset to zero, press S1 button to
stop counting and then press S2
button.
For the measurement of two finishes:
In STOPWATCH mode,
1. Press S1 button to start counting.
2. While the stopwatch is running,
press S2 button to register and
display the time of the first runner.
The stopwatch is still running in the
background.
3. Press S1 button to stop and register
the time of the second runner.
4. Press S2 button to display the time
of the second runner.
5. To reset to zero, press S2 button
again.
NOTE: You can leave the stopwatch
running while switching over to other
operating modes.
FS1080-SUMMER-A
G6746-R01
SUMMER
S1
S2
S3
