Freescale Semiconductor Microcontrollers, Руководство пользователя

Страница: 81 / 892

Debugger Components
General Debugger Components
81 Microcontrollers Debugger Manual
Example:
With two variables variable_1 , variable_2 ;
expression entered: (variable_1<<vari 0xFF) <= 0x1000 results in a boolean
type.
expression entered: (variable_1>>~variable_2)* 0x1000 results in an integer type.
NOTE It is not possible to drag an expression defined with the Expression Editor. The
forbidden cursor is displayed.
Expression Command file
The Expression Command file is automatically generated when a new application is
loaded or exiting from the Debugger. User defined expressions are stored in this command
file. The name of the expression command file is the name of the application with a
.xpr
extension (
.XPR
file). When loading a new user application, the debugger executes the
matching expression command file to load the user defined expression into the data
component.
Example:
When loading
fibo.abs
,
the debugger executes
Fibo.xpr
Data Menu
Figure 3.20 shows the Data component menu, the Zoom submenu is shown in Figure 3.29 ,
the Scope submenu is shown in Figure 3.21 , the Format submenu in Figure 3.22 , the Mode
submenu in Figure 3.24 , the Options submenu in Figure 3.26 and the Zoom and Sort
submenus in Figure 3.29 . Table 3.8 describes the Data Menu entries.
Figure 3.20 Data Menu