Freescale Semiconductor M68HC08 series, Руководство по проектированию

Страница: 85 / 124

User Interface Description
Programming and Configuration
DRM047 — Rev 0 Designer Reference Manual
MOTOROLA User Interface Description 85
7.7.2 Upload Parameters
Steps are as follows:
1. Select nodeID (node identity) - for an uninitialized device (by the
nodeID item in parameters array) the nodeID is 255
2. In the paramArray combo box, set which parameters are to be
uploaded (a dedicated box will appear just like the box selected by
paramArray PARAMS_CONFIG vote on
Figure 7-5 - in the middle
of left side).
3. Click on the UPLOAD button
4. Parameters are now reloaded from the selected Node, and in
service box is displayed the name of action that was provided by
Node (in this case it must be UPLOAD, otherwise the Node
reaction was wrong).
7.7.3 Download Parameters
For this choice:
1. Select nodeID (node identification) - for an uninitialized device (by
the nodeID item in parameters array) the nodeIDis 255
2. In the paramArray combo box, set which parameters are to be
downloaded (a dedicated box will appear just like box selected by
paramArray PARAMS_CONFIG vote on Figure 7-5 - in the middle
of left side). Then change those parameters.
3. After clicking on the DOWNLOAD button, the parameters are
written and immediately read back for verifying. If the parameter
values are the same as were determined, in the
RecvData box will
be “Ok”. In the opposite case, “Different” will be displayed. In the
service box must be “DOWNLOAD”, otherwise the Node reaction
was wrong.
7.7.4 Store Parameters
Choose Node ( nodeID ) and click on the STORE button. All parameters
are stored in the Node program memory.
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..