Figure 9. UART1 connection using mini-USB
7.2 Ethernet interfaces
The LS1043ARDB has six 100M/1G Ethernet ports (four QSGMII ports and two RGMII ports) and one 10G Ethernet port.
Connection is made directly using an RJ45 connector. Connect an appropriate cable (CAT 5E or better) between the RJ45
and target system. Auto-crossover is supported so that loopback testing between any two ports can be done.
The figure below shows the Ethernet ports available on the LS1043ARDB.
Interfaces
QorIQ LS1043A Reference Design Board Quick Start, Rev. 1, 11/2015
Freescale Semiconductor, Inc.
11
