6
66
66
7
11
125
129
12
12
10
Wires and Cable
Wires and
Cable
4
3
4. While a second person holds the Console (10)
near the Console Mount (66), connect the con-
sole wires and cable to the matching frame wires
and cable;
make sure to connect the console
wire that has a tag to the frame wire that has
a tag.
Insert the excess wires and cable into the
Console (10) and the Console Mount (66).
Tip: Avoid pinching the wires and cable.
Attach the Console (10) to the Console Mount
(66) with four M5 x 10mm Button Screws (125).
Then, attach the Console Cover (11) to the
Console Mount (66) with four M4 x 8mm Pan
Head Screws (12).
3. While a second person holds the Console Mount
(66) near the Handlebar Post (7), route the frame
wires and cable upward through the Console
Mount.
Avoid pinching the wires and cable.
Attach the
Console Mount (66) to the Handlebar Post (7)
with four M4 x 6mm Screws (129).
Avoid pinching the
wires and cable
Avoid
pinching
the wires
and cable
5.
After the training bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the training bike.
Note: Extra parts may be included. Place a mat beneath the training bike to protect the floor.
