5
1
4
116
115
112
2
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• If a part is not in the hardware kit, check to see if
it has been preassembled.
• To avoid damaging parts, do not use power tools.
• Assembly requires the following tools (not
included):
one 3 mm hex key
one 6 mm hex key
one Phillips screwdriver
one adjustable wrench
ASSEMBLY
1. Attach the Rear Stabilizer (4) to the Base (2) with
two M10 x 60mm Bolts (115), two M10 Washers
(112), and two M10 Locknuts (116).
2
2. Attach the Front Stabilizer (3) to the Base (2)
with two M10 x 60mm Bolts (115), two M10
Washers (112), and two M10 Locknuts (116).
3
116
115
112
2
