20
• The distance that you have walked or run
• The number of vertical feet you have climbed
• The speed of the walking belt
• A track representing 1/4 mile (400 m)
• Your pace in minutes per mile
• Your current lap number
• Your heart rate (see step 6)
If desired, adjust the
volume by pressing the
volume increase and
decrease buttons on the
console.
6. Measure your heart rate if desired.
Note: If you use the handgrip heart rate moni-
tor and the chest heart rate monitor at the same
time, the console will not display your heart
rate accurately.
For information about the chest
heart rate monitor, see page 14.
Before using
the handgrip
heart rate moni-
tor, remove the
sheets of plastic
from the metal
contacts. In addi-
tion, make sure
that your hands
are clean.
To measure your heart rate,
stand on the foot
rails
and hold the contacts with your palms for
approximately ten seconds;
avoid moving your
hands.
When your pulse is detected, your heart
rate will be shown.
For the most accurate heart
rate reading, continue to hold the contacts for
about 15 seconds.
7. Turn on the fan if desired.
The fan features multiple speed settings and an
auto mode. When the auto mode is selected,
the speed of the fan will automatically increase
and decrease as the speed of the walking belt
increases and decreases.
Press the fan increase button to increase the fan
speed. If you press the fan increase button once
while the fan is on its maximum speed setting,
the auto fan mode will be selected. Press the fan
decrease button repeatedly to decrease the fan
speed or to turn off the fan.
8. When you are finished exercising, remove the
key from the console.
Step onto the walking
platform and touch the
home button or the back
button on the screen or
press the Stop button on
the console. A workout
summary will appear on
the screen. After you view the workout summary,
touch the Finish button to return to the main menu.
You may also be able to either save or publish your
results using one of the options on the screen.
Then, remove the key from the console and put it in
a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord.
IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
Contacts
Содержание t 6.4
Страница 5: ...5 ...
Страница 6: ...6 all STANDARD SERVICE PLANS ...