Freemotion Incline trainer Скачать руководство пользователя страница 36

Страница: 36 / 52

TURNING THE WALKING PLATFORM

Both sides of the walking platform are designed to be used as walking surfaces. Inspect the walking platform peri-

odically for wear. If there is any wood showing through the phenolic coating, or if the surface is damaged, the

walking platform should be turned over. The walking platform will need to be turned over and the walking belt re-

placed (see page 35) after every 16,000 to 24,000 kilometers (10,000 to 15,000 miles). Follow the instructions

below to turn over the walking platform.

Remove the key and unplug the

power cord.

Remove the Front

Cover Screws (16), Cover Screws

(2) and the Front Cover (17).

Remove the Front Roller

Adjustment Bolt (19) and the Front

Roller Washer (14) from each side

of the Front Roller (13 ).

2. Remove the four Rear Walking

Platform Bolts (10) and the two

Front Walking Platform Bolts (20).

(Note: Be very careful to avoid

chipping or damaging the phe-

nolic coating on the Walking

Platform [23].)

Lift the Front

Roller (13) and slide it out of the

Walking Belt (18). Lift the Walking

Platform and the Walking Belt to

the position shown by the dotted

lines. Slide the Walking Platform

out of the Walking Belt, turn it, and

then slide it back into the Walking

Belt.

3. Lay down the Walking Platform (23) and the Walking Belt (18). Slide the Front Roller (13) back into the

Walking Belt.

4. Reattach the Walking Platform Bolts (10, 20). Thread the Front Roller Adjustment Bolts (19) with the Washers

(14) into the Roller (13). Reattach the Front Cover (17) with the Front Cover Screws (16) and Cover Screws

(2).

5. Next, the Walking Belt (18) will need to be adjusted to the

proper tension. Using chalk, make two marks on the Walking

Belt exactly 1.25 m (50 in.) apart, as shown in the drawing.

Tighten both Front Roller Adjustment Bolts (19, see the draw-

ing above) until the two chalk marks move apart an additional

5 to 6 mm (3/16 to 1/4 in.). As you tighten the Roller

Adjustment Bolts, the Front Roller (13) will move.

If the Front

Roller stops moving, do not further tighten the Roller

Adjustment Bolts; see HOW TO CONTACT CUSTOMER

CARE on page 2.

Make sure to keep the Walking Belt cen-

tered.

20 13

20 2

50”

1–4

Содержание Incline trainer





















































Результаты поиска

Содержание Incline trainer

Отзывы:

Похожие инструкции для Incline trainer

Бренды по названию

Популярные бренды

Freemotion Incline trainer, Руководство пользователя

Результаты поиска

Содержание Incline trainer

Отзывы:

Похожие инструкции для Incline trainer

Бренды по названию

Популярные бренды