33
Regular maintenance is necessary for optimal performance and long life of the INCLINE TRAINER. Please
read and follow all instructions below. If the INCLINE TRAINER is not maintained as described, compo-
nents may wear excessively, the INCLINE TRAINER may be damaged, and the warranty will be voided.
If
you have questions about maintenance, see HOW TO CONTACT CUSTOMER CARE on page 2 of this manual.
CAUTION: Make sure to remove the key and unplug the power cord before performing any maintenance
procedures.
WEEKLY MAINTENANCE
1.
Unplug the power cord.
Inspect and properly tighten all external parts of the INCLINE TRAINER.
2. Apply a mild multi-purpose cleaner to a 100% cotton cloth and remove any dust and grime from the handrails,
uprights, foot rails, frame, and motor hood. In addition, wipe the walking platform along the sides of the walk-
ing belt.
Do not wipe under the walking belt.
Apply a small amount of mild multi-purpose cleaner to a 100%
cotton cloth and wipe the console and the screens.
Do not spray cleaner directly onto the INCLINE
TRAINER or use ammonia or acid-based cleaners.
3. Make sure that the walking belt is centered and properly tightened. If it is centered and runs smoothly, do not
make any adjustments. If the walking belt needs to be adjusted, see pages 37 and 38.
MONTHLY MAINTENANCE
1.
Unplug the power cord.
Remove the Hood Support Bolts
(37) attaching the Motor Hood (91), and lift off the Motor
Hood.
2. Using a hand-held vacuum, clean the area under the Motor
Hood (not shown).
Be careful to avoid touching any com-
ponents.
Check the Motor Belt (82) for wear and cracks. If the
motor belt needs to be replaced, see HOW TO CONTACT
CUSTOMER CARE on page 2.
3. Plug in the power cord and insert the key into the console. Press the START button.
Be careful to avoid in-
jury; keep your hands away from moving parts and make sure that your clothes cannot become
caught in moving parts.
While the walking belt is moving, check the INCLINE TRAINER for unusual noises
or odors. If any of these problems exists, see HOW TO CONTACT CUSTOMER CARE on page 2.
Remove
the key and unplug the power cord.
Reattach the Motor Hood (91) with the Hood Support Bolts (37).
1
37
91
37
82
2
P
REVENTIVE
M
AINTENANCE
Содержание Incline trainer
Страница 2: ......
Страница 51: ...49 ...
Страница 52: ...Part No CC7505 R0608A Printed in USA 2008 ICON IP Inc FreeMotion Fitness Inc ...