11
10. Identify a set of Right and Left Link Covers (22,
23) and orient them as shown.
Attach the Right and Left Link Covers (22, 23)
around the Right Handlebar (20) with four #8 x 1
Tek Screws (126).
Repeat this step for the other side of the
strider.
20
126
126
23
22
12.
Make sure that all parts are properly tightened before you use the strider.
Note: Extra parts may be
included. Place a mat beneath the strider to protect the floor.
11. Plug the Power Adapter (76) into the jack on the
front of the strider.
To plug the Power Adapter (76) into an outlet,
see HOW TO PLUG IN THE POWER ADAPTER
on page 12.
76
10
11
