Your elliptical trainer has been pre-configured to operate with a Basic console and a Workout TV console (see
the drawings below). To learn about the features of the Basic console, see page 9. To learn about the features of
the Workout TV console, see the user’s manual included with the Workout TV console.
To upgrade your console and expand the capabilities of your elliptical trainer whenever you choose, see
HOW TO CONTACT CUSTOMER CARE on page 2 of this manual.
F
S
A
H
OW TO
U
PGRADE THE
C
ONSOLE
Basic
Console
Workout TV
Console
8
HOW TO CONNECT A CATV CABLE
If your elliptical trainer has a Workout TV console, a CATV cable
must be connected to the elliptical trainer for cable TV stations to
be viewed. Locate the cable jack on the front of the elliptical trainer.
Connect the CATV cable to the cable jack.
A satellite receiver, VCR, or DVD player can also be connected to
the elliptical trainer. Connect a CATV cable from the coaxial output
on your equipment (usually labeled TV OUT or RF OUT) to the cable
jack. Note: Audio/video equipment without coaxial outputs (some
satellite receivers and DVD players) will require an RF modulator to
operate with the elliptical trainer. RF modulators and external CATV cables are not available from FreeMotion
Fitness, but are available at electronics stores. See the owner's manual included with the equipment you wish to
connect to see whether an RF modulator is needed.
Cable
Jack
