
23
4. SYMPTOM: THE WALKING BELT IS OFF-CENTER
a.
If the walking belt has shifted to the left: Remove the
key and unplug the power cord.
Using the included hex
key, turn each roller adjustment bolt 1/4 of a turn in the di-
rection shown. Be careful not to overtighten the walking
belt. Then, plug in the power cord, insert the key, and use
the treadmill for a few minutes. Repeat until the walking
belt is centered.
b.
If the walking belt has shifted to the right: Remove the
key and unplug the power cord.
Using the included hex
key, turn each roller adjustment bolt 1/4 of a turn in the di-
rection shown. Be careful not to overtighten the walking
belt. Then, plug in the power cord, insert the key, and use
the treadmill for a few minutes. Repeat until the walking
belt is centered.
c.
If the walking belt slips when walked on: Remove the
key and unplug the power cord.
Using the included hex
key, turn both roller adjustment bolts clockwise 1/4 of a
turn. When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt 1 to 2
inches off the walking platform. The center of the walking
belt should just touch the walking platform. Make sure to
keep the walking belt centered. Then, plug in the power
cord, insert the key, and run the treadmill for a few min-
utes. Repeat until the walking belt is properly tightened.
a
b
c