Preparing Freemie for First Use
Disassemble and clean Freemie prior to first use. NOTE: Some parts must be
boiled initially, otherwise the parts may not fit securely. Follow the instruction
below for how to sanitize these parts.
Unsnap cup from funnel Pull valve base off funnel Remove valve from valve base
Sanitize Parts
Boil these parts for 10 minutes to sanitize and ensure parts fit securely.
DO NOT Boil or steam these parts. Hand wash only.
Parts must be thoroughly dry before use.
!
!
Do not steam sterilize or dishwash any Freemie components.
Doing so may cause the parts to warp or not fit securely.
Breast Funnel
Valve Base
Natural Shape Cup
• Do not let parts sit on the bottom of the boiling pot.
• Parts should float freely.
• Remove from water and allow to dry completely before use.
Valve
• Hand wash valve using plenty of hot water and liquid
dishwashing soap, then rinse with hot water for 10 - 15
seconds. Allow part to cool and dry completely before
use.
• Quick Connector, Pressure Reducer, T Connector and
Short Tubing can be washed by hand when necessary.
4