When you are interrupted
1. Turn off pump.
2. Disconnect tubing at T-Connector or pump (See
inset on right)
3. Leave Freemie cups temporarily in your bra, and
maintain an upright position.
4. When ready to resume pumping reconnect via
tubing, and turn on pump.
Important
• Bending over or reclining during use, or overfilling may cause leaking,
loss of suction, or milk to flow into tubing.
• Empty Freemie when full and remove immediately after pumping.
• If milk flows into tubing immediately turn off pump and disconnect from
pump. See tubing care on page 13 for cleaning instructions. Check your
pump’s manual for pump cleaning instructions.
• See Troubleshooting sections on pages 13 - 14 for additional tips.
Stop the pump
by shutting it off or breaking the suction
if you experience pain in your breast or nipple, even if you think the
pump is not the source of the pain.
10
