Tubing Care
Caring for Your Freemie System
Inspect tubing for breast milk after each pumping session. Soiled tubing that
cannot be cleaned should be replaced. Tubing cleaning options are listed
below:
1. If breast milk gets into tubing, rinse thoroughly in hot water. Shake excess
water from tubing. Wipe with a clean, soft towel and allow to air dry
completely while hanging vertically.
2. Rinse tubing with isopropyl alcohol. Hang tubing vertically. Air dry
completely.
Caution
: Be certain alcohol has completely evaporated before
using.
3. If unable to thoroughly clean tubing, cut off any soiled portion of the tubing,
or replace it. (see Ordering Parts, page 21)
4.
Do not clean tubing in dishwasher, microwave
steam bag, or by boiling.
Toubleshooting Tips
Breast Not Emptying
• Always center Breast Funnel over nipple. If the Breast Funnel is off the center of
the nipple you may impede milk release, experience loss of suction, or prevent the
complete emptying of the breast. (see page 7)
• Try adjusting the position of Freemie. Comfortably position your body to help create
the best seal between Freemie and your skin. Experiment with your body position by
sitting up straighter, leaning forward a little, or pulling your shoulders back.
• The Breast Funnels come in the standard 25mm, 28mm, and 32mm funnels. If
you need a larger or smaller Breast Funnel, visit Freemie.com to order the right size
Freemie for you.
• Each Freemie holds up to 8 ounces of milk. If you pump more than this at one time,
you need to empty and clean the device to continue pumping. (see page 12)
• If problems emptying your breasts persist, consult your lactation professional.
13
