MODEL: P36VCS
MODEL: P36VCS
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
04
05
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
WARNING
:
Do not force the handle, ensure that you
are turning it in the correct direction.
OPERATION
UNPACKING
FEATURES
SPECIFICATIONS
MAINTENANCE
PACKING LIST
Know this tool.
Read this manual carefully,
learn its applications and limitations, as well
as the specific potential hazards related to
this tool.
Always have a firm footing and grip on the
tool to counteract any force that may be
enacted during the operation of the tool.
Practice safe working practices and
ensure all relevant legal requirements are
being followed when using this tool.
The tool should not be forced, use the
correct tool for your application.
The
correct tool will do the job better and safer at
the rate for which the tool is being used.
Before adjusting, changing accessories, or
storing the tool disconnect the tool from
the battery.
This will reduce the risk of injury
from the power tool.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the tool’s
operation.
If damaged, have the tool serviced
before using.
Many accidents are caused by poorly
maintained tools.
Maintain tool with care. A
properly maintained tool will function more
smoothly and prevent binding, making it
easier to use.
Do not use the tool for anything other than
its intended use.
Do not use the tool if the trigger does not
actuate properly.
Any tool that cannot be
controlled with the trigger is dangerous and
must be repaired.
Keep the tool and its handle dry, clean
and free of oil and grease.
Always use a
clean cloth when cleaning. Never use brake
fluids, gasoline, petroleum-based products,
or any strong solvents to clean your tool.
Never use gasoline or other flammable
liquids to clean the tool.
Never use the tool
in the presence of flammable liquids or
gases. Vapors could ignite by a spark and
cause an explosion which will result in death
or serious injury.
Do not use the tool as a hammer.
Never press the trigger of the tool when it
is not intended to be used.
Do not drop or throw the tool.
Dropping or
throwing the tool can result in damage that
will make the tool unusable or unsafe. If the
tool has been dropped or thrown, examine
the tool closely for bent, cracked or broken
parts. STOP and repair before using or
serious injury could occur.
• Cordless screwdriver
• 26 Screwdriver bits set
• 1 extension bit holder
• Charger
• Instruction manual
To charge the tool, connect the charger to
the correct power source.
Connect the charger to the charging socket
on the device.
The battery is fully charged when the battery
indicator changes from red to green.
The LED lights will illuminate when the trigger
is depressed. The time-out feature will
automatically shut off the lights when the tool
is not in use.
Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to damage
from various types of commercial solvents and
maybe damaged by their use. Use clean cloth
to remove dirt, dust, oil,
grease, etc.
• To start the appliance, press the ON/OFF
switch and keep it pressed in.
• Release the ON/OFF switch to switch off the
appliance.
Set the rotation direction switch in the OFF
(Center lock) position to lock the trigger and
help prevent accidental starting when not in
use.
Push the direction of rotation switch to the
left of the trigger for forward operation. Push
the switch to the right to reverse the
direction.
The tool will not run unless the direction of
rotation selector is pushed fully to the left or
right.
Only use accessories that are identified
by the manufacturer for the specific tool
model.
Use of unauthorized parts or failure to
follow maintenance instructions may
create a risk of injury.
Tool service must only be performed by a
qualified repair personnel.
Two position adjustable pistol grip handle
Integrated 1,500mAh lithium-Ion battery
Quick release chuck
Forward and reverse switch
Battery level indicator
Drive bits and extension bit holder
This tool has been shipped completely
assembled.
Carefully remove the tool and any accesso
ries from the box.
Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.
Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
If any parts are damaged or missing, please
call 1-888-669-5672.
The charger’s power plug must match the
outlet.
Never modify the plug or try to plug
the tool into an outlet that does not match
the plug.
Avoid contact with grounded elements
such as metal tables, pipes, ranges or
refrigerators.
Contact with these elements
can put you at risk of electrical shock.
When operating the tool keep tool away
from wet conditions.
Wet tools can cause
electrical shock.
Always inspect electrical cord for damage
before and after use.
A damaged cord can
cause electrical shock.
CHARGING THE BATTERY
To install a screwdriver bit, push it into the
bit holder until it locates.
To remove a screwdriver bit, pull it straight
from the bit holder.
Use the extension bit holder if necessary.
INSTALLING AND REMOVING BITS
SWITCHING ON/OFF
ELECTRICAL SAFETY
TOOL CARE AND USE
TOOL SERVICE
DIRECTION OF ROTATION SWITCH
(FORWARD / REVERSE / CENTER
LOCK)
LED LIGHTS
The handle of the tool can be pivoted into two
positions for optimum versatility. To adjust the
tool handle, simply press the pivot release
button and move the handle to the desired
position.
PIVOTED HANDLE
Charging Input
Battery Capacity
No Load Speed
100-240V, 50/60Hz
1,500mAh
200 RPM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
