Using Your Speakermic for the First
Time
Step One: Attach Adapter
Attach your FreeLinc adapter to the accessory
interface of your portable radio (see your
portable radio’s user manual if you need
assistance locating the accessory interface). If
your adapter has a mounting clip on top, use
the clip and locking screw to secure the adapter
to your radio. If your adapter does not have a
mounting clip, use the thumb screw to secure
it to your radio. When properly attached, the
spring-loaded pins will align with the contacts
on the accessory interface of your portable radio
and the adapter should fit securely.
Step Two: Turn On Adapter
Turn on your portable radio and set the toggle
switch to “ON.” This will automatically silence
the speaker on your portable radio and route all
communications to the speakermic.
Step Three: Exit Sleep Mode
Your speakermic will be in Sleep Mode when
you take it out of the box the first time. To wake
up your speakermic from Sleep Mode, press the
Push-To-Talk
button once. After you wake it
up it automatically enters Seek Mode (see
Seek
Mode
under
Operating Concepts and Terms
).
Step Four: Pair Speakermic to Adapter
When you take your speakermic out of the box
the first time, you will need to manually pair it
with an adapter. To initiate manual pairing, hold
the speakermic within 10 inches of the adapter
and simultaneously press the
Volume Up
and
Volume Down
buttons for three seconds. When
you have successfully paired your speakermic to
the adapter, the adapter indicator light will flash
green, indicating a successful pairing.
CAUTION
: When pairing, make sure that there
are no other FreeLinc products within 6 feet of
the devices being paired.
Getting Started
GETTING STARTED
