Step Five: Establish Link (Automatic)
Once you pair your speakermic to an adapter,
the two devices establish a communication link.
This occurs automatically after pairing, and the
link persists as long as the speakermic remains
within the communication area. If you move
link is lost and the unit returns to Seek Mode.
While in Seek Mode, the speakermic attempts
to locate the adapter to which it is paired. The
persist until the unit exits Seek Mode by either:
•
Re-establishing the link with the adapter
with which it is paired - when this occurs the
OR
• E
ntering Sleep Mode - this occurs when no
link is established for four hours.
Step Six: Adjust Product Volume
The speakermic has eight volume levels. Use
the Volume Up and Volume Down buttons
on your speakermic to adjust the volume. You
can also use these buttons to adjust the
microphone sensitivity; however, you must
enter Mic mode to do so (see
Microphone Gain ).
CAUTION:
If you press the Volume Down button
continuously for six seconds, you will switch into
Microphone Gain
mode (see
Microphone Gain ).
Step Seven: Ending Use
adapter toggle switch to “OFF,” or turn your
the link will be broken and the speakermic will
enter Seek Mode. When the link has been
broken for four hours, the speakermic will
Forced Reset
pressing the Volume Up button continuously for
six seconds.
GETTING STARTED
11
