Freefly movi pro, Руководство по эксплуатации

Страница: 55 / 110

55
| OPERATION MANUAL
BATTERY INSTALLATION AND RED,
ARRI, SONY, CANON WIRING
MōVI Pro has a integrated DC camera power supply, FIZ controller, and the
capability to hot swap batteries. These features will reduce the wire clutter
around the camera and allow continuous shooting even during battery swaps.
BATTERY INSTALLATION AND HOT SWAPPING
1.
Take a MōVI Pro Battery Pack and slide it along the battery tray. Make sure
all four rails engage and the battery slides smoothly along the tray.
2. Push the battery until the connectors are fully engaged and the battery locks into place.
3. To remove the battery, lift up on the battery latch and slide the battery out of the tray.
4.
To hot swap MōVI Pro batteries, simply remove and replace the batteries one at a time.
CAUTION
If you are using the MōVI Pro to power the camera, a loss
of battery power will result in a sudden loss of power
to the camera. This can damage the camera and result
in a loss of data. Monitor the battery levels using
the GCU display and swap the batteries out as needed.