manualshive.com logo in svg

Freefly movi pro, Руководство по эксплуатации

Поделиться
Скачать
Freefly movi pro Скачать руководство пользователя страница 10

10

|  OPERATION MANUAL

vehicle for at least 45 minutes, as a damaged battery can experience a delayed chemical 
reaction that could possibly result in fire.

 

»

Never disassemble, modify, puncture, shock, crash, short circuit, and/or expose the 
MōVI Pro Battery Packs to a flame. Leakage, smoke emission, ignition, explosion or fire 
can occur, which may result in personal injury or property damage.

 

»

Never drop the charger or MōVI Pro Battery Packs.

 

»

Never allow an electrical short between the battery’s positive and negative terminals.

 

»

Never allow minors to charge or use MōVI Pro Battery Packs without adult supervision.

 

»

Never allow MōVI Pro Battery Packs to come in contact with moisture at any time.

 

»

Never leave MōVI Pro Battery Packs in an automobile or direct sunlight.

 

»

Never place or carry MōVI Pro Battery Packs in your pockets or clothing.

 

»

Always use MōVI Pro Battery Packs to power MōVI Pro. Alternate batteries are not 
supported.

 

»

MōVI Pro Battery Packs should be stored in a vented, fire-proof container. No more than 
two MōVI Pro Battery Packs should be placed in a container to avoid chain reactions. The 
recommended storage temperature range is 10ºC to 26ºC. Exposure to high tempera-
tures may cause fire, even with undamaged MōVI Pro Battery Packs.

 

»

Never charge or store MōVI Pro Battery Packs in extreme heat (>30ºC) or cold (<0ºC).  

 

»

Do not store fully charged MōVI Pro Battery Packs for long periods of time. 

 

»

Damaged batteries are extremely sensitive to temperature fluctuation and care should 
be taken in their immediate disposal. 

 

»

Do not discharge MōVI Pro Battery Packs with current exceeding the 8-10A of contin-
uous discharge current. It will cause the battery to overheat and may result in battery 
deterioration, swelling, bursting, or fire. 

 

»

Always discharge in a fireproof location.

 

»

In purchasing MōVI Pro Battery Packs as part of MōVI Pro, the buyer agrees to bear all 
responsibilities of the risks and not hold Freefly Systems, its owners and employees, 
its distributors, and/or its retailers responsible for any accidents, injury to persons, and 
property damage. If you do not agree to these conditions, please return the MōVI Pro and 
MōVI Pro Battery Packs to the place of purchase in a new and unused condition.

Содержание movi pro















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды