background image

2

3

Contents

Freedom Heat Pumps

Who are Freedom Heat Pumps?

Freedom Heat Pumps are a wholesale distribution company for the Samsung EHS and the Hitachi Yutaki range of heat pumps and 
underfloor heating systems. We offer technical support, training, design and consultancy services and operate the  

www.samsungehs.co.uk 

and 

www.freedomhp.co.uk

 web sites and freedom heat pumps and Hitachi Yutaki Facebook pages. 

We launched Samsung’s eco heating systems in the UK in 2010 and have been market leaders in this sector with over 5000 units out in 
the field. In 2016 we started distributing Hitachi’s Yutaki range of units to expand our heat pump portfolio and market influence. 

How we work

Our approach is very straightforward. If you have a set of plans or an outline of the requirements for a project, send them to  

[email protected]

. From there, we will produce a heat loss calculation in line with today’s standards, and put together a list of 

the kit required at your cost price. 

Alternatively, if you don’t currently have a heat pump project, but would like to become a heat pump installer, and don’t know where 
to start, contact us on 02380 274833 or email us at 

[email protected]

 and we can set you on the correct course.

Homeowners 

If you are the homeowner please ask your installer for the pdf homeowner manual or download it at 

www.freedomhp.co.uk.

 Scroll to 

the bottom and click the link for end user manual. It shows how the unit should be used and how to get the best from it.

Freedom Heat Pumps

 3

Underfloor Heating

 4

Hitachi Warranty Registration 7 Year

 5

Handover of the System

 7

Maintenance

 12

Installation

 13

Monobloc Installation

 14

High Temperature S80 Installation

 18

Combi Installation

 23

Split Installation

 28

Start-up procedure

 33

Remote controller set up first time

 34

What the Unit Comes With and What You Will Need

 38

Wiring and Power Supply Information, All systems

 40

How To Wire The Electric Meters

 42

Special systems and extra settings

 43

Содержание RASM Series
























Отзывы: