23
Make sure your reading language is the same as the language of your
document.
Place a document, leave it still and make sure that there is nothing
between the cameras and the document.
Press the Scan Button just once and wait for the shutter sound.
Do not stress the Daisy keys during the OCR process; wait until OCR is
done before you navigate through the text.
Upon scanning a document, if you are not getting an accurate read, or if the
OCR process is not beginning and you only hear multiple beeps:
Try turning the camera light off with the Daisy down arrow, and then re-
scan the document. The need for the camera light to be turned off usually
occurs if you are scanning a glossy document or the device is near a
window where very bright sunlight is shining through. The Daisy down
arrow will need to be pressed after you have selected the Scan and Read
mode with the Action Button.
Troubleshooting: Calendar Application
If you do not hear the reminder after you finished your recording
Increase the volume
– turn the Volume knob clockwise.
Make sure that when you are talking your Ace is close to the device.
If you think that you did not hear the reminder you have entered at the right
date/time:
Make sure that the device had been turned on and was charged.
Go to the Main Menu, and select Calendar. Use the Right Roller to scroll
to All Reminders, and press the Action Button to select. Check whether
the expected reminder exists. It is most likely that the reminder has not
been scheduled for the time you tried to hear it.
