Checking the Status of Paper-Out Detection
You're most likely to use the "Paper-out Detection" setting to
check whether it's on or off. It's best to keep it turned on all the
time so the Blazer can let you know when it thinks it's out of
paper.
When you enter the Printer Configuration menu, press Skip
eleven times to arrive at the Paper-out Detection setting. The
Blazer says, "Paper-out detector on, active", which is the
default. Should you want to turn it off for some reason, simply
press Enter.
Checking the Status of Auto-Linefeed
You're most likely to use the "Auto Linefeed" setting to check
whether it's on or off. It's best to keep it turned off all the time
since your Braille translator's printing facility should be able to
send linefeed characters properly to your Blazer.
However, if you do need the Blazer to detect whether it's
receiving linefeed characters, here's what to do.
When you enter the Printer Configuration menu, press Skip
twelve times to arrive at the Auto linefeed" setting. The Blazer
says, "Auto linefeed off, active", which is the default. Should
you want to turn it on, simply press Enter.
Changing whether control characters are Brailled
You're most likely to use the "Print Control Characters" setting
to check whether your formatting parameters are being
transmitted properly from your Braille translator's printing
facility.
It's best to keep it turned off all the time so the Blazer doesn't
Braille strange-looking characters (like dot 4 m for a carriage
return).
However, if you do need to print control characters from the
Blazer, here's what to do.
When you enter the Printer Configuration menu, press Skip
thirteen times to arrive at the Print Control Characters setting.
30
440102-001 Rev. A
