5.2 System Components
Each Turbo Screen has a bracket to match with the projector stand. It can
be used to adjust the Turbo Screen's height, angle, left and right as well as
front and rear position to best fit the space of the Turbo Screen and
projector. It receives signal from projector through
Signal SYNC Cable
,
and identify the projector status of 2D or 3D, and move to the right
position.
Figure 5-2 System Components
5/15
6/15
380mm
1
100mm
2
3
3D projection position
Sliding Rail
2D projection position
Motorized Bracket
Install fastener
Cabinet Mount Component
The distance between top
o f m o v e a b l e b r a c k e t a n d
projector lens center is 380m
The distance between top
of moveable bracket and
projector lens is 100mm
Fix cabinet mount components to
the projector cabinet with clips
6. System Installation
6.1 Install cabinet mount components:
adjust height and
length of cabinet mount components, and fix the components to the
projector cabinet with fastener, as shown in
Figure 6-1.
Figure 6-1 Install Cabinet Mount Components
