Freecom ValueLoader, Руководство пользователя

Страница: 54 / 88

ValueLoader Administration
Updating Firmware
40 ValueLoader LTO Tape Autoloader User Manual
3
Press the
[+]
or
[-]
button until “Autoload Mode” appears on
the LCD screen. The second line displays the current status of
this mode.
4
Press the
[Enter]
button. The LCD screen indicates whether you
are about to turn Autoload Mode on or off.
5
Press the
[Enter]
button to accept the change to Autoload Mode
or press
[Cancel]
to exit and not save the changes.
Updating Firmware
3
This section explains how to update firmware using either a
firmware upgrade tape or SCSI commands.
Using a Firmware
Upgrade Tape
3
This option performs a firmware update for the ValueLoader and/
or the HP LTO drive using firmware upgrade cartridge.
Caution:
Regardless of the firmware update technique, DO
NOT POWER CYCLE OR RESET THE
VALUELOADER DURING THE UPGRADE
PROCESS. Doing so could cause the ValueLoader to
become inoperable.
Note:
This code update operation assumes that a slot is
available in the carousel for the upgrade cartridge, and
the upgrade cartridge is imported as part of this
procedure.
If the carousel is full, export a cartridge to make room for
the firmware upgrade cartridge. (See Exporting
Cartridges on page 29 for instructions.) Do not import
the firmware upgrade cartridge before starting this
procedure.