SPECIFICATIONS
FRONT PANEL
q
PRESET/MIDI CHANNEL Section
• PRESET:
When the
PRESET
LED is illuminated,
the preset number for the currently recalled preset is
indicated. There are 99 presets in the unit and user
presets are numbered from 01 to 90.
Factory presets are set to Nos.91–99 and users cannot
change these presets. Note that the same parameters as
the factory presets are copied to Nos. 01–09 in advance.
Based on these factory presets, you can easily create
delay settings to your own taste.
• CHANNEL:
When the
CHANNEL
LED is illuminated,
the receiving MIDI channel set by the user is indicated.
You can set to one of channels 1–16 or to Omni mode
(factory default setting) to receive all of the channels.
When set to Omni mode, the display shows [
AL
].
A change to the setting is automatically stored without
pressing the
STORE
button.
w
BPM/DELAY TIME Display Section
• BPM:
When the
BPM
LED is illuminated, the currently
set BPM value is indicated. The BPM value can be set in
1/10-unit steps. This means that you can set the tempo
very precisely.
* BPM: Beats Per Minute. Unit used to show the tempo of
performance indicated by the number of quarter notes (crotchets)
counted in one minute.
ex) If
♩
= 120, then 1 BPM is 500 ms. 1 minute ÷ 120 (BPM) = 0.5
(s) = 500 ms
• msec:
When the
msec
LED is illuminated, the current
delay time is shown in the unit of msec. The delay time
can be set in the range of 1–9999 msec (up to approx.
10 seconds).
e
OUTPUT Section
• DELAY:
When the
DELAY
LED is illuminated, the delay
output level is indicated. This level can be set in the range
of 0–99.
Table of Contents
1 Specifications ............................................................................................................................ 4
2 Front Panel .............................................................................................................................. 5
3 Rear Panel ............................................................................................................................... 8
4 How to Use FT-1Y ....................................................................................................................... 8
4-1 Change Parameters ............................................................................................................... 9
4-2 Store Presets ....................................................................................................................... 9
4-3 Recall Presets ...................................................................................................................... 9
5 Tap-Preferred Mode .................................................................................................................... 10
6 Footswitch Function Swapping ....................................................................................................... 10
7 Initializing ................................................................................................................................ 10
8 Factory Presets ......................................................................................................................... 10
9 MIDI Specifications ..................................................................................................................... 11
n
Specifications
• Input Impedance:
min. 500 k
Ω
• Output Load Impedance:
min. 1 k
Ω
• Terminals:
Standard 1/4” phone jack (IN, OUT, HOLD)
• Power Supply:
Dedicated AC adapter
For USA: FA-1220D-JA
For UK: FA-1220D-UK
For Europe: FA-1220D-EU
• Power Consumption:
12 VDC, approx. 400 mA (max.)
• Dimensions (W x H x D):
146 x 120.5 x 57 mm, 5.75 x 4.74 x 2.24 inches (incl. protuberances such as footswitches, jacks, etc.)
• Weight (excl. AC adapter):
approx. 570 g (20.11 oz.)
• Accessories:
Owner’s Manual, AC Adapter for FT-1Y
Specifications and appearance subject to change without notice.
Содержание FT-1Y
Страница 1: ...OWNER S MANUAL Ver 1 0...
