13 2011
COMPUTER
OPERATION INSTRUCTIONS
Power up
The Elliptical is supplied with an external power supply. When power is connected to the
Elliptical, the console will automatically power up. If there is no input to the console for 20
minutes the console will go to stand-by mode. In stand-by mode the console display will
turn off. To turn the console on press any key.
When initially powered on the console will perform an internal self-test. During this time all
the lights will turn on. When the lights go off the dot matrix display will show a software
version (i.e.: VER 1.0) and the message window will display an odometer reading. The
odometer reading displays how many hours the elliptical has been used and how many
virtual km /miles the elliptical has gone. The time in hours will be to the left and the
odometer in km /miles will be displayed to the right. Displaying of “
K
” is for metric system
and “
M
” is for imperial system.
The odometer will remain displayed for only a few seconds, then the console will go to the
start up display. The dot matrix display will be scrolling through the different workout
profiles of the programs and the message window will be scrolling the start up message.
You may now begin to use the console.
POWER CONNECTION Front left of machine
