FRC TankVisionPro WLA300, Руководство пользователя

Страница: 4 / 44

WLA300 Rev170606
4
INTRODUCTION
Overview
The FRC TankVisionPro indicator shows the actual volume of liquid in a tank. The
liquid in the tank exerts a pressure that is measured by a sensor. As the amount of liquid
changes, the pressure it exerts on the sensor changes proportionally. The pressure change
is used to calculate the exact volume of liquid in the tank. The TankVisionPro can be
calibration to accurately display the volume of liquid in tanks of all shapes and sizes.
The display module is able to communicate with other display modules over the
FRC datalink. This allows for one master display module to control multiple displays.
The module also provides an output for cab miniature displays, remote light drivers,
and a low level warning buzzer.
The TankVisionPro indicator is a unique design made up of an extended wide view
lens with 9 or 10 super bright LEDs (depending on the chosen configuration) mounted
behind it. This allows the display to be visible and clearly read from all line-of-sight
angles for a full 180 degrees.
The pressure/vacuum foam tank vent is supplied for use on foam concentrate storage
tanks. These tanks should remain closed to the atmosphere. The FRC vent enables
the tank to compensate for changes in pressure or vacuum due to thermal expansion,
filling, or when withdrawing foam concentrate from the tank.
The MaxVision LED tank display provides a remote, wide angle view of how much
water or foam concentrate is left in the tank in fractional 1/8 tank eight level increments.
The remote light driver provides the option to have four 60 watt remote lights
controlled by the TankVisionPro to show full, 3/4, 1/2, and 1/4 tank.
Features
Self-Calibrating for Any Shape or Size Tank
Visual Warnings At 1/4 and Almost Empty Tank Conditions
Multiple Remote Displays
Pressure/Vacuum Foam Tank Vent for Sealed Foam Tanks
Color Coded for Water, Class A, or Class B Foam
Self-Diagnostic Capabilities
Cab Miniature Display (Optional)
MaxVision LED Tank Display (Optional)
Remote Light Driver (Optional)
Low Level Warning Buzzer (Optional)
Tank Thin Wall Adapter Kit (Optional)
Output for Foam Fill and Auto Tank Systems (Factory Programmed)