FRC TankVisionPro WLA300, Руководство пользователя

Страница: 30 / 44

WLA300 Rev170606
30
Warning and Control Level Adjustment
Code 21 To set the Audio warning level. Default—1/4 (25%)
Code 22 To set the Visual warning level. Default—1/4 (25%)
Code 23 To s e t t h e " Ta n k F u l l " a u d i o s i g n a l l e v e l .
Default—disabled.
Code 24 To set the Valve control signal " Low " activation level.
Default— 1/2 (50%)
Code 25
To set the Valve control signal "
Full
" deactivation level.
Default —7/8 (95%)
Code 26
To set the level for Audio warning to be turned off (or disabled).
Default —1/4 (25%)
Code 27 To set the level for Visual warning to be turned off.
Default —1/4 (25%)
Code 28 To set the delay time in seconds before the Audio warning is activated.
Default —1 second ( NOTE : each LED delays the Audio warning
activation by 1 second. This is adjustable from 1 to 7 seconds. )
1. Enable the data entry by holding the magnet at
C 2
for 5 seconds. This sets the
desired level for either Warnings or Valve Control setting activation.
2. Wait five seconds.
3. Save the new setting by holding the magnet at C 2 for 5 seconds.
Note : If the WL300 is set with code 24 and 25, the buzzer output will work
as a valve controller.
Figure 11. Diagnostics - Warnings