FRC DRY GEAR PLUS, Сборка и руководство по эксплуатации

Страница: 10 / 32

DGA200 Rev160525
10
Assemble Manifolds and Tent Frame Long Angles (6, 7,
and 8 Station Only)
NOTE:
The joining plates may be installed on one half of the manifold or
tent frame long angles from the factory.
Parts Needed
2-Manifold (1)
2-Manifold Joining Plate (3)
4-Tent Frame Long Angle (5)
2-Tent Frame Joining Plate (6)
12-Flat Head Socket Cap Screw, 1/4-20, 1/2 inch (4)
16-Socket Cap Screw, 1/4-20, 3/4 inch (2)
16-Flat Washer, 1/4 inch
Procedure
NOTE: The distance from the end of the manifold to the manifold glove
mount holes is different at each end. The glove post holes should be 4 1/4
inches from the manifold end that is attached to the joining plates.
1. Install manifold joining plates (3) between manifolds (1) with sixteen screws
(2) and washers.
2. Install tent frame joining plates (6) between tent frame long angles (5) with
twelve screws (4).
End Procedure