Camisa Mini Dumpers TP 280 Eco
TP 280
TP 285
23
provided for and exceeding the maximum
masses indicated by the Manufacturer are
forbidden.
Exceeding the capacity approved by the
manufacturer poses a risk and can cause
serious damage to the machine structure.
The machine is not designed to tow
other equipment.
The machine is designed to be driven by a
pedestrian operator, it is absolutely
forbidden to drive the machine from inside
the loading body or to ride on its frame.
It is absolutely forbidden to modify the
structure of the machine or insert a
running board for transporting the
operator.
It is strictly forbidden to carry persons or
animals on the machine during operation
or transfer.
WARNINGS FOR CORRECT USE OF THE MACHINE
Before operating the machine, check that
the load is correctly distributed and
secured to prevent it from moving during
operation and to prevent dangerous
displacements of load.
Ensure that the load does not impair the
visibility of the operator.
Do not let the transported goods overhang
the body.
Do not load or unload the goods while the
machine is parked on a downhill slope.
Do not move the machine whilst the mini
dumper body is in a vertical position.
Check that any attached equipment does
not unbalance the machine.
Before operating the machine, check that
the equipment is correctly connected by
referring to this MIUM and to that of the
connected equipment.
Within the area of the work site only
authorised staff must be present
If persons or animals are found to be on
site immediately stop and move them
away from the area.
Only start up and manoeuvre the machine
when there are no persons or children
present in the operating area.
Start slowly and increase the speed
gradually.
Slow down before bends especially
depending on the type of load and ground
conditions. Avoid working at excessive
speeds and avoid turning on slopes.
Proceed with the utmost caution to avoid
sudden braking when travelling with heavy
loads.
When driving on sloping terrain, pay
particular attention to the adhesion
conditions of the terrain and the presence
of any obstacles or ground instability; it is
advisable to entrust the driving of the
vehicle to personnel with experience and
good knowledge of the area.
When going downhill, engage the same
gear that would be used if going up the
same slope.
Choose the operating mode according to
the gradient and condition of the ground.
