7
POS. 4: SPREADING
Figure 17: Position 4 - Placing behind the tractor.
When spreading, the machine runs straight behind the tractor (adjust bolt 42452).
The rotors rotate in
opposite direction (lever on reversing gear 42509), as shown on figure 13.
The rotor is engaged in the reversing gear in such a way the pick-up springs cannot touch each
other.
Put the rake arms in the fixed position (see illustration pos.4), tilt machine forward (adjust cylinder
42411) and adjust wheel height.
The protective brackets should have been fitted and the catch arm can be turned up if necessary.
The working width is infinitely variable and can be adjusted to suit the nature of the crop by cylinder
(42451).
Figure 18: The rake arms are mounted in fixed
working position.
Figure 19: Tilt the machine by a cylinder
cylinder (42411).
