You can use a password to keep the information in the Phone List
private. The password is requested when the unit is turned on and
the Phone List is accessed.
Password Warnings
Warning!After you set the password, you must enter the password
to access the phone list for the first time during a session. Always
record your password and keep it in a separate place.
If you forget the password, you must reset the unit to access the
phone list. Warning! Resetting the unit erases all user-entered infor-
mation. Always keep written copies of your data.
If you do not have a reset button located on the back of your unit,
remove the batteries, wait at least two minutes, and then re-install
them. For battery instructions, see Installing the Battery on page 4.
If you have a reset button, use the end of a straightened paperclip to
gently press the reset button.
If the unit does not reset after pressing the reset button, follow the
above instructions for removing the batteries.
Password Setup
1. Press
.
2. Use
to see
Set Password
and press ENTER.
3. Type a password and then press ENTER.
Your password can have up to 8 characters.
You are prompted to retype your password, and press
ENTER to confirm.
4. To test the password, press
twice, type the pass-
word, and press ENTER.
5. To disable the password, repeat Steps 1 and 2
above, and press ENTER when
Password
displays.
13
Using a Password
