Franklin EF1-230V, Руководство по эксплуатации

Страница: 7 / 12

7
A
B
Multiple Welds
In Primary mode the EF1 can
simultaneously weld up to three
UPP™ fittings, provided that:
• The sum of the resistance values
(circled number on UPP™
fittings) does not exceed 10.
• The UPP™ fittings are
connected to the EF1 in series
using the bridging leads provided
(see photos A & B).
You can ensure that you have
connected the fittings correctly and
that the welds are successful by
checking that all of the connected
fittings get warm and that all of the
indicator pins are exposed at the
end of the welding time. Fusion
fittings with X or no marking may
NOT be welded in series.
Maintenance
• There are no user serviceable parts inside the EF1 welding unit.
• Damaged or defective products should be returned to an approved service agent for
repair or calibration.
• Welding unit and cables should be checked for damage or defects and parts repaired
or replaced prior to each use.
• The welding unit can be cleaned using a soft brush or cloth.
• After use, carefully coil cables and store in the compartments provided in the carry
case.
• Electrical Safety Testing “Portable Appliance Test” (PAT) should be carried out in
accordance with local legislation.
• It is recommended that the welder is returned to Franklin Fueling Systems on a
regular basis, at around 3 year intervals, for checking and recalibrating.