Franklin EF1-230V, Руководство по эксплуатации

Страница: 5 / 12

5
Main Features
UPP™ electrofusion fittings are welded using a constant current. The EF1
automatically recognizes the fitting when connected and applies the correct
amount of energy for a successful weld.
7 pin Weld cable
connector
Fault
indicator
Weld progress
LED’s
Temperature sensor
Power on Indicator
ON / OFF Switch (on
side of unit)
START / STOP button
The EF1 takes the ambient temperature into account when calculating the
energy required to weld correctly. It must therefore be allowed to reach
ambient temperature before use and must be at the same temperature as the
fitting to be welded. The temperature sensor is located adjacent to the power
cable entry gland.
The EF1 works on standard alternating current and either a mains connection
or a generator can be used. Generators must have a rated output of at least
3.5 kVA and power input must be between 194 and 264 volts at 40 to 70 Hz.
The EF1 has an on / off button, a weld start button and an LED display
showing the weld progress. The LEDs can also show any fault conditions that
may affect the weld.