ZMI
_001_
2030
0485
72-P
W
C3O00
02_#
SEN_#
AQU_#
V
2.
fm
- 10 -
☞
Important!
Do not (d) bend the hose.
11.12
Attach the hose max. 20 mm in the hand dryer outlet.
11.13
Attach the hose to the hand dryer outlet using the screws.
11.14
Push the pipe clamp onto the hose.
11.15
Attach the hose to the washbasin nozzle with the pipe clamp.
12. Startup
12.1
Turn the power on.
12.2
Allow the system to run in for at least 15 min.
12.3
Stroke over the plastic tile with your hand.
• The water will flow.
13. Function
13.1
Stroke over the plastic tile with your hand.
• The water will flow.
• The water flow stops automatically after the set flow time (10 seconds).
The hand dryer then activates for 20 seconds.
☞
An automatic flushing function after 24 hours of non-use was set in the factory.
☞
You can set the flow time and automatic flush using the system software.
14. Setting the sensor
14.1
Use a screwdriver to set the range.
+ Longer range
– Shorter range
