manualshive.com logo in svg
background image

 

 
 
 

 
 

TECHNICAL HANDBOOK    HOB    OPERA – updated  MARCH 2006 
 
MODELS: POI63GAVDO 

6691503 

 

TABLE OF CONTENTS 

user’s instructions     Hob cleaning and  maintenance    
Technical data   Installation  Replacing injectors    
adjusting  minimum   Esploded view  List spare parts  Glass cover   
technical note new knob  Technical note rubber     

 

 

 

User’s instructions  

Igniting the burners In these models the knob controls both ignition and the 
safety device. Proceed as follows  
to ignite the burners:  
1) Turn the chosen knob.  
2) Keep the knob strongly pressed in for 3/4 seconds to permit the spark to 
light the gas  
that exits from the flametamer and to permit the thermocouple to heat up.  
3) Release the knob after about 3/4 seconds and adjust the flame as 
desired, rotating  

the knob anti-clockwise. Repeat points 1 and 2 if the flame does not remain on.  

Symbols 

Circle: valve off;  
large flame + star: maximum flow rate;  
small flame: minimum flow rate.  

Use of Dual double-control burner  

• The first knob on the left controls the outer ring on the burner  
• The second knob on the left controls the inner ring on the same burner  
• The two rings can be used individually or simultaneously to get maximum heating  
power  

Содержание POI63GAVDO














Отзывы: