– 33 –
EN
Remove the side frames
1
2
3
X
X
Bend the crosspiece which is engaged in the
fixing bush downwards and remove it from the
groove.
X
X
Push the side frame upwards and remove it from
the two upper hooks.
Cleaning
X
X
Clean the side frames and the telescopic guides.
X
X
After cleaning, keep the side frame tilted and
insert the side frames into the two respective
guides on the top.
X
X
Bend the crosspiece which is engaged in the
fixing bush upwards and insert it in the groove.
X
X
Insert the telescopic guides.
Replacing the oven lamp
Franke ovens are equipped with two rectangular
lamps. The replacement lamp must meet the
following technical specifications:
– Temperature resistance: 300°C
– Voltage: 220-240 V, 50/60 Hz
– Power: 40 W
– Connection: G9
CAUTION! Damage to the lamp due to wrong
handling!
X
Z
Avoid touching the lamps with bare hands.
X
Z
Use a cloth or a sheet of kitchen paper.
WARNING! Possibility of electric shock!
X
Z
Ensure that the oven is switched off before
replacing the lamp.
WARNING! Electric shock due to wrong
handling!
X
Z
Switch the oven off.
– Depending on how the oven is installed:
Unplug the oven or disconnect the power at
the main electrical system switch, e.g., switch
off the fuse of the oven in the fuse box.
X
X
Remove the glass cover by carefully prying it off
with a flat-blade screwdriver.
X
X
Remove the lamp from its holder.
X
X
Replace the lamp.
X
X
Reattach the glass cover.
WARNING!
Ensure that the
appliance is switched
off before replacing
the lamp to avoid
electric shock.
FS 913 P BK DCT TFT AUS
FS 913 M BK DCT TFT AUS
