Franke DESIGN CHEF DC72MXS, Руководство пользователя

Страница: 6 / 17

6
Introduction
Congratulations on choosing a Franke appliance. Before using your new appliance, we recommend you read the instructions and advice provided in this manual.
This should facilitate your understanding of the appliance use and also extend its life. Always keep this owner
’
s manual close to hand since you may need to
refer to it in future.
First use
The first time you use the oven, we recommend that you set the temperature control knob to the highest setting and leave the oven on for at least 40 minutes with
nothing in it, with the oven door open and the room properly ventilated. The odour that is often detected during this initial use is due to the evaporation of
products used to protect the oven during storage and until it is installed. Once this initial step has been taken, the oven is ready for use.
Advice
A good habit to get into immediately is to pre-heat the oven to the desired temperature before placing your dishes inside it. During cooking, never place pans or
cookware directly onto the bottom of your oven. These should be placed on the grids or oven trays provided, inserted at one of the 5 rack heights available;
failure to observe this particular piece of advice could damage the enamel coating on the oven interior. Never line the oven interior with tin foil, especially the
oven bottom. All repairs should be carried out by specialised authorised staff. Contact your nearest after-sales service centre and request the use of original
spare parts only. Your Franke oven is coated with a special enamel layer, which is easy to clean. Another good habit to get into is to clean it often and to avoid
reheating caked on grease spots and food residue from previous uses. All self-cleaning panels (if the oven is fitted with them) should be cleaned with soapy water
(see cleaning instructions). N.B.: - before you turn your oven on, read the instructions on using the timer (see page 16).
-if the oven is fitted with an automatic cooking programmer or end cooking timer, you will have to select the
“ manual ” option identified by the symbol
to use the oven manually.
Close-up view
Control Panel
Selector knob
Use this knob to select the oven operating mode depending on the type of cooking required. Set the knob onto any of the cooking modes and the light
inside the oven will turn on to indicate that the appliance is on.
Timer/Programmer