19
B - cooking
/
(remaining cooking time
/
set temperature - alternating)
C - end of coooking
Once cooking has terminated, the oven will beep intermittently (**) for 1 minute; this can be turned off with
the button (but also with and ), while the display reads
The oven will turn off the heating elements by itself, while the fan will stay on to stop continued heating,
along with the light to enable the user to check the contents of the oven. The temperature may stay high for
some minutes. If you wish to continue cooking manually, press to reactivate heating. The message
AUTO
will disappear, while the symbol will reappear. If you wish to stop cooking, turn the program selector
knob to 0. For 3 seconds the display will show
After which the display will return to showing the time of day (if
you want to turn off the display
when the
oven is off, press buttons and at the same time, the display will read:
with buttons and set this parameter to:
the display will turn off and will only turn on again when the oven is operating).
(**): the volume of the beep can be set when the buzzer is operating (the setting also applies to subsequent
beeping), by pressing button .
Starting delayed cooking with set duration
You must set the cooking duration and the time at which it is to end. Suppose it is now 8.00 and you wish to
cook for 30 minutes with the program finishing at 13.00.
1. Turn the program selector knob; the display will show the recommended temperature, which can be
adjusted with the temperature regulator knob .
2. Press the button and then the keys and to set the desired cooking duration, 30 minutes in this
case.
3. Press the button and within 4 seconds set the time at which cooking is to end with buttons and ;
in this case 13.00.
The display will read:
The oven is now programmed and in standby.
To check the set duration press button ; you can adjust it with buttons or .
To check the set temperature press button or ; you can adjust it with knob .
Cooking phase:
Once the oven has reached the cooking phase it will be behave just as in point B of the previous paragraph.
The only difference is that the cooking time countdown starts immediately, rather than after the set tempera-
ture has been reached. This is because the controller assumes that the food has already been loaded into
the oven when it was programmed. The preheating time is thus included in the cooking time.
All manuals and user guides at all-guides.com
