8
Metal grease filters
Metal filters can be washed also in a dish machine. They need to be washed every
time a drop-symbol appears in the display or at least every two months. In case of
very frequent use these have to be washed even more often. Alarm reset • Press
the G-key for at least 2 seconds.
Cleaning
• Open the comfort panel.
• Remove the filters one by one by pushing them backwards and pulling them
down contemporaneously.
• Wash the filters. Pay attention not to bend them. Make sure that filters are
completely dry before putting them into their seat. (a possible modification of the
filter surface doesn’t influence its efficiency).
• Place the filters again into their seats and make sure that the handle of the filter
remains outside.
• Close the comfort panel.
Charcoal filter (recycling version)
This filter cannot be washed or regenerated. It must be replaced when the C
appears on the display or at least once every 4 months.
The filter saturation alarm has to be activated already before. Activation of the
alarm signal • In the recycling version hoods the filter saturation alarm must be
activated during the installation or later.
• Switch off the hood and the lights.
• Press the E-key for about 5 seconds until the last two segments of the motor
LEDS are lit on the display.
• By releasing the E-key the clock icon starts to flash.
• Within 3 seconds press the D-key to activate/deactivate charcoal filter
saturation alarm.
• C-symbol lit - charcoal filter saturation alarm ACTIVATED. • C-symbol unlit -
charcoal filter saturation alarm DEACTIVATED.