Franke 3590040 FSBS 6001 N ID XS A+, Руководство пользователя и инструкция по установке, Страница: 23 / 74

en en
If the refrigerator can not pass through a door
during installation, follow these steps.
Removing Freezer Door
❈
Remove front bottom cover first, if it is attached.
Remove the bottom cover first.
Pull out the left collar of the
coupling first, then hold the
coupling and pull out the left
water tube.
(Dispenser Models Only)
Unscrew top hinge cover with a
screw driver.
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
Lift up the front of hinge to
remove.
(After the hinge is removed the
door can fall down forward. Be
careful !)
Be careful not to damage the water
line when removing the door.
Removing Refrigerator Door
Unscrew top hinge cover with a
screw driver.
Insert a thin screw driver into the
side groove of the cover to
remove.
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect harness wires.
Lift up the front of hinge to
remove.
(After the hinge is removed the
door can fall down forward. Be
careful !)
Lift the door straight up to remove.
43
Check if the refrigerator can pass a doorway or enter a door first.
Find a suitable place to install
❈
Sufficient space from refrigerator back to the wall
for free air ventilation. ❈
Avoid direct sunlight.
Once the installation place is ready follow the installation instructions.
If surround temperature of refrigerator is low (below 5), foods can be frozen or the refrigerator can
work in abnormal way.
Note
42